Shabebe Mulch Glue 1 Gallon - Ready to Use

No Mixing

Shabebe Mulch Glue 1 Gallon - Ready to Use

Name: Shabebe Mulch Glue 1 Gallon - Ready to Use
Brand: Shabebe
SKU: SBB-MG-94
Price: 44.99 USD
Availability: InStock

Pour, spray, and keep mulch where it belongs.

$44.99

Only 30 units left

Size:1 Gallon

Single 2-Pack 1 Gallon

Quantity:

Suitable Materials

✅ Best for: Pine Straw, Wood Chips & Mulch
✅ Also suitable for: Sand, Bark, Rubber Mulch & Small Decorative Gravel

💡 Tip: Apply on clean, dry surfaces for best hold.
❌ Not recommended on: Porous stone (volcanic rock, limestone); Wet debris; or Glass.

Coverage Quick Guide

1 Gallon: 1 Coat ~194 sq. ft. / 2 Coats ~129 sq. ft.

Note: Actual coverage may vary depending on stone size, dilution ratio, application method, and number of coats.

What's included

1 x Mulch Glue 1 Gallon
2 x Nitrile Gloves

Shabebe Mulch Glue 1 Gallon - Ready to Use

$44.99

Ready to Use. No Mixing Required.

✓ Pour directly into your sprayer
✓ Locks mulch, wood chips, pine straw in place
✓ Ideal for beds, borders and slopes
✓ Strong hold, still allows drainage
✓ Eco-friendly water-based formula

Best for Decorative Areas

Ideal for garden beds, tree rings, and other low-traffic spaces. Not recommended for vehicle traffic. For high-traffic walkways, use our Rock Glue Pro instead.

Keeps Natural Look

Dries clear and keeps the natural color of your rocks/mulch.

Allows 99% Water Drainage

Forms a flexible bond between rocks/mulch without creating a solid barrier, so water can still pass through and drain normally.

Safe for pets and plants

Our water-based, non-toxic formulas are safe for pets, and garden plants once fully dried. Ideal for residential landscaping and home improvement projects.

Lasts All Season

Provides season-long hold and naturally breaks down over time. Simply refresh each year to keep your rocks/mulch neat and in place.

How much do you need?

Enter your project area and click Calculate.

Gallons Needed

—

gallons

Mix Ratio

Undiluted

glue : water

Recommended Coats

2

coats

Your Area

—

sq ft

For best results: apply in 2 coats over 1" depth material.

Before: Mulch and leaves scatter easily

After: Mulch stay put

Super Thick Super Stick

With a viscosity of 10,000+ mPa·s, Shabebe Mulch Glue covers up to twice the area of typical products.

Stronger hold, less effort, maximum efficiency.

Eco-Friendly Formula

Shabebe Mulch Glue is water-based, VOC-free and eco-friendly, with Intertek Green Leaf testing and RoHS compliance for safe use.

It is proven to be degradable, giving you an environmentally conscious choice you can trust.

Two Ways to Apply →

Spray & Go

Best for landscaping areas.

1. Open & Spray

Shake before use. No dilution needed.

2. Rake & flip

Rake for full coverage, then flip and respray any uncoated pieces.

3. Spread & Smooth

Spread and level with a trowel.

4. Reinforce

Allow 12–24 hours to dry, then apply a second coat for a stronger bond.

Mix & Apply

Best for stronger bonding, low foot-traffic.

1. Mix

Mix directly with clean, dry rocks.

2. Fully Coat

Shake, roll, or toss stones until evenly coated.

3. Pour

Pour on the ground.

4. Spread & Smooth

Spread and level with a trowel.

Need More Info?

What is mulch glue used for?

Shabebe Mulch Glue is designed for decorative mulch beds. Its water-based formula helps keep mulch in place, reduces maintenance, and allows water to drain naturally, preventing mulch from blowing away or washing out during rain or wind.

Not recommended for soil-building mulch.

How to apply Shabebe Mulch Glue (Concentrated)?

There are three ways to apply, depending on your project:

Pour. Mix Shabebe Mulch Glue with water in a watering can, then pour directly over your garden bed. Simple and no extra equipment needed.
Spray. Mix with water and apply with a pump sprayer or electric sprayer. Best for larger areas or more even coverage.
Mix with Clean Mulch. Combine the concentrated glue directly with clean, dry mulch (a little water can be added) before laying it down. Great for fresh installs.

Tips: Apply on clean, dry mulch for best hold. Lightly rake after application to help the product penetrate the top layer.

Can it hold up in rain, sun, and freezing weather?

Yes. Our formulas stay flexible in rain, sun, and cold winters, helping prevent material loss and keeping your landscape intact through storms and seasonal changes.

How long does mulch glue take to dry?

Drying time typically ranges from 12–24 hours, depending on temperature and humidity. Avoid foot traffic or rain during this period.

Can mulch glue be used after rain?

For best results, apply Shabebe Mulch Glue to dry mulch and allow it to dry fully before rain or watering.

How to apply mulch glue around plants?

It is safe for plants when used as directed. Apply directly onto the mulch or rocks above the soil, keeping the spray away from leaves and nearby plants.

For extra protection, you can use a barrier to shield greenery.

Will mulch glue stop weeds?

Shabebe Mulch glue is not a weed killer. However, by binding the top layer of mulch together, it can help reduce weed growth and soil disturbance.

Shabebe Mulch Glue 1 Gallon - Ready to Use

Ready to Use. No Mixing Required.

How much do you need?

Spray & Go

Mix & Apply

Need More Info?

You may also like