Shabebe
Shabebe Epoxy Resin 2 Gallon Kit, Upgraded Crystal Clear Resin Epoxy Food Safe with Pump
Shabebe Epoxy Resin 2 Gallon Kit, Upgraded Crystal Clear Resin Epoxy Food Safe with Pump
Couldn't load pickup availability
Trying to find clear casting resin that is crystal clear, high gloss, self-leveling, self degassing, and higher anti-yellowing?
Our 2 gallon clear epoxy resin is the best choice, allows you to create beautiful pieces with a glass-like and bubble-free finish, completely free of imperfections.
Here are some tips for you to use the art resin:
1. Preheat the Resin(If at low temperatures ): Prior to casting, warm the epoxy resin using a water bath to ensure a smoother consistency.
2. Accurate Measurement: Measure the resin and hardener accurately using volume, not weight, for precise ratios.
3. Slow Mixing: Mix the resin and hardener slowly; rapid mixing can introduce unwanted air bubbles.
4. Allow Settling Time: Let the mixed resin sit for 5-10 minutes before pouring to allow any bubbles to rise to the surface.
5. Optimal Curing Temperature: Avoid curing in cold temperatures. The ideal curing range for resin is 75-85°F (24-29°C).
Following these guidelines will enhance the performance of our epoxy resin, ensuring a successful application. Please note that there are many reasons for air bubbles, non-curing during operation, if there are any problems, please feel free to reach out to us and we will solve them for you! Happy crafting!
Frequently Asked Questions
Q1: How to Avoid Sticky or Soft Resin?
A: 1.Accurate measuring. Following the correct 1:1 ratio by volume. 2.Mixing resin properly. Mix slowly for at least 3 minutes. Be sure to scrape the sides of your cup for equal mixing. 3.Do not curing in cold temperatures. The ideal curing range for resin is 75-85°F (24-29°C). 4. Do not added too much resin colorant, never add more than 6% of the total combined volume of resin and hardener.
Q2: How to remove the bubbles?
A: 1.Warm your resin before casting, using a water bath to warm it. 2.Stir epoxy resin slowly and thoroughly uniform until art resin becomes clear(stirring too fast can cause bubbles).When epoxy resin becomes smooth((watery status),pour it into the model to ensure sufficient self-leveling. 3.You can use some tools to eliminate air bubbles, such as a heat gun, lighter, etc.
Q3: Does this work well with tumbler？
A: Our epoxy resin is not suitable for surfaces that are too smooth and for adding alcohol inks, so we do not recommended for tumbler.
Q4: How to improve the self-leveling of epoxy resin?
A: The cold temperatures will reduce the fluidity of the epoxy resin and make it more viscous. So If operating at low temperatures, we suggest warming the epoxy in a water bath before casting to ensure a smoother consistency.
